This is the portable Turbidity Meter Mi415

Turbidity refers to the concentration of undissolved, suspended particles present in a liquid.

Turbidity is a measure of the clarity of a sample.
For potable water applications turbidity is a good indicator of water quality.
Turbidity Measurement is achieved by analyzing the amount of light refracted from suspended particles such as clay, silt and organic material.
By measuring turbidity, by photometric or tube methods, it is possible to estimate suspended solids content.

Mi415 has two operating ranges; 0.00 to 50.00 FNU, and 50 to 1000 FNU that can accommodate the most turbid condition you may encounter.

Mi415 is supplied in a hard carrying case, complete with reagents.

Introduction to Turbidity

The cloudy appearance of water (called Turbidity) is caused by suspended material.
The unit of measure adopted by the ISO Standard is the FNU (Formazine Nephelometric
Unit) and by EPA is NTU (Nephelometric Turbidity Unit).
The other two methods used to test for turbidity and their measurement units are the JTU (Jackson Turbidity Unit) and the Silica unit (mg/L SiO2).
See the conversion table of these methods and their units for your reference.

Hard Carrying Case
The Turbidty Meter comes complete in hard carrying case, making it ideal for field measurements.
Glass Cuvets
The Turbidty Meter is supplied complete with 2 cuvets, reagents, hard carrying case, wiping tissue, 9V battery and instructions.
SPECIFICATIONS
Range
0.00 to 50.00 FNU; 50 to 1000 FNU
Resolution0.01 FNU; 1 FNU
Accuracy±0.5 FNU or ±5% of reading, whichever is greater
Methoddetection of scattered light
Light Sourcehigh emission infrared LED
Light Detectorsilicon photocell
Environment0 to 50°C / 32 to 122°F; max RH 100%
Battery Type1 x 9V
Auto-offafter 5 minutes of non-use
Dimensions192 x 104 x 52 mm
Weight380 g

 

ACCESSORIES
Mi515-1000 FNU calibration solution, 30 mL
10 FNU, calibration solution, 30 mL
500 FNU, calibration solution, 30 mL
Mi0001Glass cuvets (2 pcs)
Mi0002Caps for cuvets (2 pcs)
Mi0003Stoppers for cuvets (2 pcs)
Mi0004Tissue for wiping cuvets (4 pcs)
Mi00059V battery (1 pc)
ORDERING INFORMATION
Mi415 is supplied complete with 2 cuvets, reagents, hard carrying case, wiping tissue, 9V battery and instructions.